橋式,bridge type英語短句,例句大全

橋式,bridge type
1)bridge type橋式
1.The design of bridge type oven tunnel with far infrared heaters for solidity;橋式遠紅外加熱固化烘道的設計
2.The new bridge type two-way DC converter;新型橋式雙向直流變換器
3.In the design of reconstructed Songhuajiang River Extra Large Bridge, a comprehensive comparison was made with respect to bridge location and bridge type, and hydraulic model test was conducted.為改建鐵路綏佳線佳木斯松花江橋 ,設計時進行了橋位、橋式綜合技術經濟的比選。

英文短句/例句

1.The Research on Three-dimensional CAD System of the Metal Structure of Overhead Traveling Crane;橋式起重機橋架三維CAD設計系統研究
2.Comparison of bridge type schemes for Yuxihe extra-long bridge at Mijiayuanze;米家園則榆溪河特大橋橋式方案比選
3.electric single-beam bridge crane電動單梁橋式起重機
4.General purpose overhead cranesGB/T14405-1993通用橋式起重機
5.floor-controlled overhead crane地面操縱橋式起重機
6.hand-operated single-and-double beam bridge crane手動單雙梁橋式起重機
7.cab-operated overhead crane司機室操縱橋式起重機
8.remote-controlled overhead crane遠距離操縱橋式起重機
9.bridge-balanced d-c amplifier橋式平衡直流放大器
10.electric overhead travelling grab crane橋式電動抓斗起重機
11.reactor service bridge反應堆維修橋式起重機
12.suspended stacking crane懸掛橋式堆垛起重機
13.double-beam bridge type grab crane雙架橋式抓斗起重機
14.Kelvin bridge ohmmeter凱爾文電橋式電阻表
15.overhead travelling crane with hoist電動葫蘆橋式起重機
16.semi-controlled three-phase bridge rectifier circuit三相橋式半控整流電路
17.overhead crane with double trolley on the same rail同軌雙小車橋式起重機
18.Comparison of Bridge Structures of Railway Through Truss Composite Bridges下承式鐵路鋼桁結合橋的橋式結構比較

相關短句/例句

Bridge[英][br?d?][美][br?d?]橋式
1.Problems about waves of bridge rectifying circuits;橋式整流電路的波形問題
2.By using the bridge phase conjugation in photorefractive material, AND、OR、NOT and NOR logic functions can be performed.報道一種利用光折變晶體橋式互泵浦相位共軛實現與、或、非、或非等光邏輯運算的方法。
3.The bridge phase conjugator(BPCM)using(BaSr)TiO 3 is demonstrated.利用（ＢａＳｒ）ＴｉＯ３晶體研制了橋式互泵浦相位共軛器（ＢＰＣＭ），在實驗上研究了ＢＰＣＭ反射率隨互泵浦束的入射角和泵浦比變化的規律，并提出利用互泵浦相位共軛構建一種新型光觸發器的設
3)bridge-type橋式
1.Simulation study of a new bridge-type superconducting fault current limiter新型橋式超導故障限流器的仿真研究
2.Accurate stiffness and stress models of a class of bridge-type direct coupling compliant mechanism have been studied.分析了一類橋式直接耦合柔性機構的精確的剛度和應力模型。
4)bridge pattern橋接模式
1.In this paper,the software design method of observer and bridge patterns was(introduced),and the framework and implementation was described.本文采用軟件設計模式方法,在分析了開放式數控系統功能界面需求的基礎上,引入了觀察者模式和橋接模式的軟件設計方法,闡述了其實現結構與運行機制,設計了一個基于以上軟件模式的人機界面。
2.Bridge pattern avoids client to set the accessing parameters dire.橋接模式避免了客戶端直接設置目錄服務器具體連接方式的參數,并且可以很好地適應新連接方式的擴展;命令模式把行為以命令對象的形式進行封裝,將客戶類與具體的請求類進行解耦合,使得客戶端可以在不知道操作細節的情況下,發送不同的請求,進一步簡化了目錄服務器的訪問過程。
5)ribbon pontoon bridge帶式舟橋
1.Four ribbon pontoon bridge models are taken as experimental objects,which were made with FRP/steel composite structure.本文采用玻璃鋼/鋼材復合結構形式的4折帶式舟橋模型為試驗對象,對每兩個方舟模型互相連接后進行豎向加載試驗。
2.The center pontoon models of ribbon pontoon bridge type 79A were taken as experimental objects, which were made in proportion to 1∶4 with fiber reinforced plastics(FRP)/steel composite structure by hand lay up moulding process.以我軍現裝備的79A帶式舟橋為原型,以采用手糊成型工藝制作的按1∶4比例縮小的玻璃鋼(FRP)/鋼復合結構的方舟模型為研究對象,采用“三弦梁”理論對模型的承載能力進行了計算。
3.On the basis of advantages of the two materials FRP and steel,combined with the structural characters of ribbon pontoon bridge,the idea of using FRP/steel composite structure in developing new type ribbon pontoon bridge is discussed.根據玻璃鋼和鋼材這兩種材料的優點及現行帶式舟橋的結構特點,論述了采用玻璃鋼/鋼復合結構研制新型帶式舟橋的構想。
6)bridge circuit橋式電路
1.Through the analysis of the shape of the bridge circuit component KBU and the characteristics and difficulties of the encapsulating process,the structure of the mould for encapsuˉlating KBU is introduced.通過分析橋式電路元件KBU的外部形狀及封裝工藝特點和難點 ,介紹了KBU塑封模的結構、設計要點和模具的工作過程。
2.Using a bridge circuit to detect the horizontal displacement, describing the curve of the height horizontal displacement in the welding torch moving by micro computer, mirrorring the live circumstances of operator.該系統利用線陣ＣＣＤ確定焊槍距離焊口的高度，利用橋式電路確定焊槍水平方向移動的位置，實時描繪出焊槍在移動過程中高度隨水平位置變化的曲線，模擬出焊接操作的實時情況。