碳膜,carbon film英語短句,例句大全

碳膜,carbon film
1)carbon film碳膜
1.The tribological properties of carbon films prepared by IBAD technology are investigated with self-made ball-on-disk film tester and compared to the CrN-Cu layer.采用自制薄膜球盤磨損試驗機 ,研究用IBAD技術制備碳膜的碳膜的摩擦學性能 ,并與CrN Cu膜進行對比。
2.On the basis of study and analysing the brass tube of condenser corroded boring hole in a short tern,determined the cause that was surviving carbon film on the brass tube inner surface,this paper explored the relevant mechnism and eliminated the film measures.　通過對電廠凝汽器新銅管短期發生腐蝕穿孔事例的研究和分析,確定其是由于管內表面存在殘碳膜而引起。
3.Results showed that under the condition of dry friction, the wear resistance of the composites was chiefly related to the existing time of a continuous and effective carbon film formed on both surfaces of the mating pair, which was determined by the carbon fiber volume of the composites.研究結果表明，在干摩擦條件下，復合材料的耐磨性主要與摩擦副間維持連續有效碳膜時間的長短有關，該時間取決于碳氈纖維的體積分數。

英文短句/例句

1.carbon film rotary variable resistor碳膜旋轉可變電阻器
2.The Structure and Properties of Amorphous Hydrogenated Carbon Films and Cr-containing Diamond-like Carbon Films;含氫碳膜及Cr-DLC膜的結構和性能研究
3.Ceramic base body using in carbon film resistorGB/T12635-1990碳膜電阻器用陶瓷基體
4.The Preparation and Properties Research of Fluorinated Amorphous Carbon Films;氟化非晶態碳膜的制備及其性能研究
5.Study on Morphology, Structure and Property of Polyetylene Terephalate Substrate Fluorocarbon Films;PET基氟碳膜形貌、結構及性能研究
6.The Surface Morphology and Structure of Fluorocarbon Films Deposited on PET Substrate;PET基氟碳膜的表面形貌及結構研究
7.carbonic acid polyester paint-film capacitor聚碳酸酯漆膜電容器
8.The Study of Diamond Films and Carbon Nitride Films Deposited by HFCVD;熱絲化學氣相沉積金剛石膜及碳氮膜的研究
9.testing method for carbon black dispersion of geosynthetics土工膜碳黑分散度試驗法
10.fixed carbon resistor, composition- or film-type復合式或膜式寄存定碳質電阻器
11.Other materials such as carbon-film have been introduced.另外有些材料，諸如碳精膜片已被采用。
12.Preparation of BCN thin films by ion beam assisted pulsed laser deposition離子束輔助脈沖激光沉積硼碳氮薄膜
13.Studies on Preparation by HFCVD and Wettability of Amorphous Carbon Films;HFCVD制備非晶碳薄膜及其潤濕性的研究
14.Research on Preparation of Silicon Carbonitride Thin Films and Photoluminescent Properties;硅碳氮薄膜的制備與發光性能的研究
15.Study on the Gas-sensitivity and Related Properties of Carbon Nanotube Film;碳納米管膜的氣敏及相關性質的研究
16.Preparation of Polyarylene Ether/carbon Nanotubes Gradient Composite Films;聚芳醚/碳納米管復合梯度膜的制備
17.Research on Manufacturing of Compound Metal-Carbon Series Electrical Idiocratic Fuctional Film;金屬—碳系復合電特性功能膜制備研究
18.Exergy Analysis of Three-effect Falling-film Evaporation System for Potassium Carbonate;碳酸鉀三效降膜蒸發系統的（火用）分析

相關短句/例句

Carbon films碳膜
1.Carbon films prepared by ion beam enhanced deposition and their applications for suppression of electron emission;離子束增強沉積碳膜及其在抑制電子發射中的應用
2.Investigation on the preparation of carbon films from organic solutions by pulsed arc discharge;脈沖電弧放電電離有機溶液制備碳膜的研究
3.Advances in preparation and application of carbon films;碳膜制備及應用研究進展
3)Carbon membrane碳膜
1.The effect of temperature on the permeation of oxygen,nitrogen and their binary gas mixture through carbon membranes were investigated using a dual control volume grand canonical molecular dy-namics method.采用雙控體積巨正則系綜分子動力學(DCV-GCMD)方法,用二維狹縫代替傳統的一維狹縫構建膜孔模型研究了溫度對氮氧純氣體及其混合物在碳膜內的滲透特性,探討了氮氧分離機理。
2.Recently, the carbon membrane is used in many fields as a adsorption materials.近年來碳膜作為一種吸附用材料在各個方面得到廣泛的應用 ,本文概述了碳膜的原料來源、制備、特點及其吸附機理和性能表
4)carbon coating碳膜
1.Two kinds of carbon coatings with high hardness and low coefficient of friction were deposited by closed filed unbalanced magnetron sputtered ion plating techniques.采用非平衡磁控濺射離子鍍技術制備碳膜,通過對刀具后刀面磨損曲線、切削力以及所加工孔精度的分析,證明高硬度低摩擦因數碳膜高速鋼刀具在干切削條件下鉆削鋁硅合金時具有良好的切削性能。
2.In the process of the high purity quartz crucible wall carbon coating for CdZnTe crystal growth,the factors affecting the carbon film quality,the coating temperature,the coating time,the gas flux,and the cooling time,were studied and optimized using orthogonal design method.用金相顯微鏡,掃描電鏡觀察分析了不同鍍膜工藝條件下得到的碳膜表面形貌,用WS-2005自動劃痕儀對碳膜與石英管壁之間的結合力進行了測試。
5)Carbon Nitride film碳氮膜
1.The dry-cutting tests are carried out by Carbon Nitride film coated tool on Si-Al alloy.用碳氮膜涂層刀具對硅鋁合金棒進行了干式切削試驗,通過對加工表面粗糙度和刀具耐用度的研究,探討其切削性能。
6)microfiltration carbon membrane微濾碳膜
1.The microfiltration carbon membrane was prepared by pyrolysis of novolac phenol-formaldehyde resin.以高含碳熱塑性酚醛樹脂為原料,通過碳化制備了酚醛樹脂基微濾碳膜,考察了碳化條件,包括碳化終溫、升溫速率、恒溫時間和保護氣流速對膜的平均孔徑、孔徑分布和氣體透量的影響。