1)groove[英][ɡru:v][美][gruv]槽形
1.And the best interface form in joint has been make sure,that is to say the best form of new-old cement concrete interface is groove face.研究了新舊水泥混凝土接面不同毛面形式其接面強度的區別,通過對八種不同造型的接頭界面的連接試驗,找出了界面造型與接面強度關系的規律,提出了接面鑿毛的最佳界面形式,得出新舊混凝土體對接時界面鑿毛造型應是槽形為最佳的結論,并提出提高接面強度的方法和工藝,這一成果對橋梁施工工藝具有指導意義。
英文短句/例句
1.troughing idlers(皮帶機用)槽形布置托滾
2.Theoretical Analysis of Chip Flute of Spiral Taper Milling Cutter with An Equal Helical Angle等螺旋角錐形立銑刀容屑槽槽形的理論分析
3.Numerical Simulation and Optimum Groove Geometric Parameters for Spiral Groove Dry Gas Seal;螺旋槽干氣密封數值模擬及其槽形參數優化
4.Graver: V-shaped steel cutting tool used by engravers.Also called burin.雕刻刀:雕刻銅版用的槽形鋼刀。
5.trench mask definition槽腐蝕用掩模圖象形成
6.carbide T-slot milling cutter硬質合金T形槽銑刀
7.Standpipes are big water tanks.圓形水塔是一個大水槽。
8.V-groove MOS field effect transistorＶ形槽ＭＯＳ場效晶體管
9.D. Clean the slots of O-rings, Talfon slots, body spindle and spherical surface intensively.形環溝槽，鐵氟溝槽，主體軸心孔及球面加強清洗。
10.Research and Application on Real-time Monitoring Technology of the Freeze Profile of the Aluminum Reduction Cell;鋁電解槽槽膛內形在線監測的研究及應用
11.Study on Effect of Symmetry of Wedge-shaped Cutting Hole Angle on Cut Blasting楔形掏槽炮孔角度對稱性對掏槽效果影響研究
12.Experimental Research on Cylinder Flow-Measuring Flume in Trapezoid-Transect Canal梯形渠道圓柱形量水槽的試驗研究
13.Square files are used to enlarge square and rectangular openings, filings, slots, keyways and other similar purposes.主要是為了擴大方形和長方形、銼削、槽孔、鍵槽和其他相似的用途。
14.The surface of the table is cut with T slots so that workholding devices such as the vise can be clamped to them.工作臺的表面切有T形槽以便工件夾具，如臺鉗，能固定在T形槽上。
15.4. The super heat of electrolysis influences the shape of profile ledge in the cell. .4、電解質的過熱度影響著電解槽槽膛內形的的形成。
16.Benches are equipped with either epoxy resin sink or polyolefin oval cupsinks while fume hoods are equipped with polyolefin cupsinks.工作臺配備環氧樹脂水槽或聚稀烴類橢圓形杯槽。通風柜里也安裝聚稀烴類橢圓形杯槽。
17.It is new, and ugly, and squat, and functional, and built like a tank.銀行嶄新、陋、矮，很實用，像個方形大水槽。
18.The keyhole of a cylinder lock.鑰匙槽圓柱形鎖的鑰匙孔
相關短句/例句
U-shaped slot形槽
1.A novel U-shaped slot broadband microstrip antenna structure is presented.針對微帶天線的窄頻帶提出了一種新穎的U形槽的寬頻帶微帶天線結構,該天線有別于一般的U形槽微帶天線,其輻射貼片是附著在介質板的下面,天線采用探針-微帶方式饋電。
3)grooved taper pin帶槽錐形槽
4)channel-section steel槽形鋼, 槽鋼
5)groove geometry character溝槽形態
6)slotware槽形構件
延伸閱讀
CH系列槽形混和機
CH-50CH-100
CH-150
CH-200
CH-300工作容積（L）
50100
150
200
300
攪拌轉速(rpm)
2424
24
24
24
攪拌電機(kw）
1.52.2
3
4
5.5倒料電機（kw）
0.55
0.55
0.75外形尺寸（長×寬×高）(mm)
1200×500×9501400×580×1000
2000×630×1150
2300×750×1350
2700×850×1500重量 (kg)
